3Pin Israel Plug Power Cord with Stripped End AC Power Extension Cable for Robot Controller
1. Product Overview
The 3-Pin Israel Plug to Stripped End power cord is a professional-grade power connection solution with a standard Israel three-pin plug (SI 32) on one end and a pre-stripped bare wire end (usually 15-20mm) on the other end. This design is developed for applications that require direct wiring or customized power connections and is widely used in industrial equipment, electrical installation and professional maintenance.
2. Core advantages
Direct wiring design: the stripped end can be directly connected to the terminal/distribution box, eliminating the need for additional connectors
Full specification certification: in line with SI 32 Israeli electrical standards
Industrial-grade durability: using 105°C temperature-resistant PVC material
Versatile adaptation: supports a variety of voltage configurations (250V/16A)
Easy installation: pre-stripped design saves 90% of wiring time
3. Technical specifications
| Parameter |
Specification |
Remarks |
| Plug standard |
SI 32 (Israel three-pin) |
with grounding protection |
| Wire end treatment |
Three-wire stripping (live/neutral/ground) |
Stripping length 15±2mm |
| Rated voltage |
250V AC |
50/60Hz |
| Current carrying capacity |
16A max |
Continuous load recommendation ≤13A |
| Conductor specification |
3×1.5mm2 stranded copper |
in line with IEC 60228 Class 5 |
| Insulation material |
PVC |
temperature resistance 105°C |
| Outer diameter |
8.2±0.3mm |
including sheath |
| Bending life |
>20,000 times |
IEC 60227 test standard |
| Flame retardant |
grade VW-1 |
UL certified |
| Operating temperature |
-40°C ~ +105°C |
Short-term peak 120°C |
4. Typical application scenarios
Industrial automation: Robot controller, PLC cabinet power distribution
Data room: Customized power supply system for server rack
Medical equipment: Power transformation of large medical instruments such as MRI
Building electrical: Temporary construction power distribution system connection
Audio and video engineering: Power distribution of professional audio equipment
Agricultural machinery: Power connection of greenhouse control system
5. Professional purchase suggestions
Current matching: It is recommended to choose 1.5mm² specification for continuous loads above 10A
Length selection:
Wiring in the cabinet: 1-1.5m
Connection between devices: 2-3m
Special scenarios can be customized to 5-10m
Certification requirements: Medical use needs to confirm whether it complies with IEC 60601-1
6. Safety use specifications
Before installation:
Confirm that the equipment is powered off
Use a voltage tester to verify
When wiring:
Use wiring terminals of corresponding specifications
The ground wire (yellow-green) must be reliably connected
The wire ends must be tinned to prevent oxidation
During use:
Overload is prohibited (continuous>16A)
Avoid contact with oily substances
Check the temperature of the connection point regularly
7. FAQ
Q: Can it be used in outdoor environments?
A: The standard model is not waterproof, and an IP67 protection kit is required for outdoor use
Q: Can the stripped end be processed again?
A: Yes, but it is recommended to retain at least 10mm of insulation layer
Q: Is the ground wire required to be connected?
A: Class I equipment must be reliably grounded, and Class II equipment can be grounded as needed
Q: How to identify different wire diameters?
A: 1.0mm² outer diameter 7.2mm, 1.5mm² outer diameter 8.2mm (including sheath)
Q: Service life?
A: Up to 8-10 years under normal use
8. Product Summary
This Israel standard stripped power cord is an ideal choice for industrial power connection with its professional-grade configuration (16A/250V carrying capacity + 1.5mm² wire diameter). Its pre-stripped design can save 40% of installation time, and its 105°C temperature resistance ensures safe operation in high temperature environments. It is particularly suitable for key places such as medical equipment and data rooms that require high-reliability connections. It also meets the requirements of SI 32 and IEC dual certification and is recommended by professional electrical engineers.
9. Value-added services
Support cable color customization (red/blue/yellow-green standard colors)
Provide matching waterproof junction box solutions
Optional EMI shielding layer (for precision instruments)
Bulk purchase provides professional wiring solution design
Professional tips: It is recommended to conduct an insulation resistance test every 3 years (standard ≥10MΩ) to ensure long-term safety.
){kind=link}