MMC UTI Tape D-2401-2 Temperature Ulllage Interface Detector MMC UTI Meter

Product Description

 

Product Description

MMC UTI Tape D-2401-2 Temperature Ulllage Interface Detector MMC UTI Meter

Cable width	12.5mm~13mm
Cable thickness	0.75mm~0.85mm
Ruler width	10mm±0.2mm
Coating	Coating material resistance to chemical and acid
Specification	15M
Color	yellow

Specification

special characteristics

Coating material resistance to chemical and acid.

High temperature resistance

Tank Gauging Tape MMC UTI Flexi Dip D 2401-2

Restricted and Open Gauging Tapes provide a convenient and accurate means for measuring ullage, product temperature and the oil-water interface. The units are configured to operate in the trimode, bimode, interface or temperature mode. Each instrument is designed to maximize ease of use. A single penetration of each tank can provide comprehensive data about internal tank conditions. When the electronic probe senses hydrocarbon, a steady tone is heard; when sensing water, it emits an intermittent tone. Temperature is shown on an LED display in the hub of the instrument.

HERMetic UTImeter Gtex and Otex is a portable gas tight liquid level gauge designed for closed gauging of hydrocarbons and chemicals. It ensures increased safety and efficiency in cargo control measurement, custody transfer, temperature verification and free water detection on marine vessels.

Coating material resistance to chemical and acid.

What is Ullage Temperature Interface (UTI)?

The UTI detector is a portable liquid level gauge that is commonly used in the shipping industry to measure the amount of hydrocarbons and chemicals in a ship's tank. This device includes a sensor probe, measurement tape, display unit, and winding drum. Its primary purpose is to determine the temperature and oil-water interface on tankers by attaching the sensor probe to the measurement tape, which can vary in length from 15m to 40m. Manufacturers offer a temperature range between -40°C and 110°C. All UTI meters have earth grounding capabilities for safety purposes.

Note: It is very important that the Ullage Temperature Interface system is grounded to the tank before the probe is introduced into the tank and remains grounded until after complete withdrawal from the tank.


ULLAGE TEMPERATURE INTERFACE DETECTOR is necessary for cargo tanker and it is designed for measuring the ullage level, the oil-water interface level, the temperature sampling the cargo.
hermetic GTEX RTEX OTEX uti tape
GT3 MK3 UTI meter
MMC uti tape d-2401-2
TANKTECH uti tapp meter T2000-TFC-02 T2000-TFC-01
MARSEN uti tape

Application

SPECIFICATIONS
Accuracy

• of Tape: +/- 1/8″ (+/- 3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale).
• of Temperature Display: +/- 0.5° F (+/- 0.2° C) +/- 1 digit error.
• of Calibration Range: 32° F (0° C) to 176° F (88° C).
• of Probe: For dryness to within 3/8 inch (10mm) of bottom.Ambient Temperature Limits

• LCD: same as above.
• Sensor: same as above.

Application:

• Open gauging ("O" type) (Safe product vapors only).
• Restricted gauging ("R" type) via MMC vapor-control valve.

Operation: U-Ullage, I-Interface (oil/water), T-Temperature.
Suitable for ULLAGE INTERFACE TEMPERATURE DETECTOR

Packaging & Shipping

Our Company

FAQ

Q 1: I didn't find my needed model in this page.

Answer: Dear Friends, e-catalog will emailed to you asap when you contact with us. Also, we supply customization service. So,contact us !

Q 2: What's your Minimum Order Quantity?
Answer: 1PC

Q 3: When can I get the price and what's the validity?
Answer: usually within one day.Validity is 30 days

Q 4: What's your payment terms?
Answer: By T/T 30% in advance ; Balance 70% before shipment. 

Q 5: What's your delivery time?
Answer: It depends on whether we just have the stock for your type. Or, it takes about 10 - 30 days for normal orders.

Q 6: What's your package method ?
Answer: Usually, cartons
Any other questions please contact with us freely:)