Honeywell Hermetic UTI Calibration Tape Gtex Ts10191 15m Marine Tank Meter 15m Hermetic Marine UTI Calibration Tape

Product Description

 

Product Description

Honeywell Hermetic UTI Calibration Tape Gtex TS10191 15m Marine Tank Meter 15m Hermetic Marine UTI Calibration Tape

Ensure the highest standards of accuracy and reliability in marine tank gauging with the genuine Honeywell Hermetic UTI Calibration Tape. This GTex TS10191 15m Marine Tank Meter is engineered for precision, featuring a robust hermetic seal that protects against the harshest marine environments. Designed as a direct replacement and calibration standard, this UTI tape delivers critical ullage and temperature data for confident custody transfer, inventory management, and operational safety.
 

Cable width	12.5mm~13mm
Cable thickness	0.75mm~0.85mm
Ruler width	10mm±0.2mm
Coating	Coating material resistance to chemical and acid
Specification	15M
Color	white

 

Precision Measurement - Ensures accurate fluid tracking with consistent adhesion
 OEM-Equivalent Quality - Direct replacement for Honeywell GTEX TS10191 UTI meters
 Durable Construction - Resists chemical exposure, moisture, and temperature fluctuations
 Extended Length - 15-meter roll for reduced changeover frequency
 Easy Installation - Compatible with standard UTI meter tape mechanisms

• Model: TS10191 (Honeywell GTEX compatible)

• Tape Width: [Specify mm/inches]

• Length: 15 meters (49.2 ft) per roll

• Material: Chemical-resistant composite

• Operating Temperature: [Include range, e.g., -20°C to +60°C]

• Compatibility: Honeywell GTEX hermetic UTI meters

 

Who Is This For?

This genuine Honeywell UTI tape is an indispensable tool for:

• Marine Engineers & Ship Crews on tankers and vessels requiring precise liquid cargo management.

• Port Surveyors conducting independent and official tank measurements.

• Service Technicians specializing in the maintenance and calibration of Honeywell marine instrumentation.

• Fleet Management Companies dedicated to operational efficiency and compliance.

Common Use Cases:

• Replacing a faulty or aged UTI tape in a Honeywell GTex TS10191 system.

• Performing scheduled calibration and preventive maintenance on marine tank meters.

• Serving as a critical onboard spare part to ensure uninterrupted operations and quick repairs.

special characteristics

Coating material resistance to chemical and acid.

High temperature resistance

Tank Gauging Tape MMC UTI Flexi Dip D 2401-2

Restricted and Open Gauging Tapes provide a convenient and accurate means for measuring ullage, product temperature and the oil-water interface. The units are configured to operate in the trimode, bimode, interface or temperature mode. Each instrument is designed to maximize ease of use. A single penetration of each tank can provide comprehensive data about internal tank conditions. When the electronic probe senses hydrocarbon, a steady tone is heard; when sensing water, it emits an intermittent tone. Temperature is shown on an LED display in the hub of the instrument.

SPECIFICATIONS
Accuracy

• of Tape: +/- 1/8″ (+/- 3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale).
• of Temperature Display: +/- 0.5° F (+/- 0.2° C) +/- 1 digit error.
• of Calibration Range: 32° F (0° C) to 176° F (88° C).
• of Probe: For dryness to within 3/8 inch (10mm) of bottom.Ambient Temperature Limits

• LCD: same as above.
• Sensor: same as above.

Application:

• Open gauging ("O" type) (Safe product vapors only).
• Restricted gauging ("R" type) via MMC vapor-control valve.

Battery: 9-Volt
Operation: U-Ullage, I-Interface (oil/water), T-Temperature.
 

Coating material resistance to chemical and acid.

High temperature resistance
UTI (Ullage Temperature Interface) is a detector used to measure the ullage, temperature, and the oil-water interface onboard tankers. On this page, we examine the UTI functions, principles of working and the importance of its annual calibration. MMC's UTI gauging tapes are capable of detecting all floating and non-conductive hydrocarbons. Each instrument is designed for ease of use. Gauging for liquid or interface level is accomplished simply and quickly. When the electronic probe is lowered and senses a hydrocarbon, a steady horn tone is sounded and a yellow LED illuminates. When sensing an oil-water interface or a non-conductive liquid heavier than water, an intermittent horn tone sounds and a red LED starts flashing.

UTI (Ullage Temperature Interface) is a detector used to measure the ullage, temperature, and the oil-water interface onboard tankers. On this page, we examine the UTI functions, principles of working and the importance of its annual calibration.   

What is Ullage Temperature Interface (UTI)?

The UTI detector is a portable liquid level gauge that is commonly used in the shipping industry to measure the amount of hydrocarbons and chemicals in a ship's tank. This device includes a sensor probe, measurement tape, display unit, and winding drum. Its primary purpose is to determine the temperature and oil-water interface on tankers by attaching the sensor probe to the measurement tape, which can vary in length from 15m to 40m. Manufacturers offer a temperature range between -40°C and 110°C. All UTI meters have earth grounding capabilities for safety purposes.

Note: It is very important that the Ullage Temperature Interface system is grounded to the tank before the probe is introduced into the tank and remains grounded until after complete withdrawal from the tank.

How does Ullage Temperature Interface (UTI) work?
In the following paragraphs, we will introduce how the ullage, temperature and oil-water interface are detected onboard:

Ullage Detection

The ullage detector of the UTI integrates two elements (1) electronic circuits and (2) two piezoceramic plates. When the sensor head reaches the oil or petroleum, an ultrasonic sound is emitted. The receiver processes and sends this sound to the instrument unit that emits a continuous beep sound.

Temperature Detection

The sensing component of the UTI detector is a Platinum Resistance Temperature Detector (RTD). This element is situated in the temperature electrode that is filled with a heat transfer compound paste to hasten the latency. After digitizing the RTD element signal, the micro-controller in the sensor probe corrects and compensates for any errors. The RTD element's attributes are saved in the sensor memory and are exclusively for that sensor, so a new calibration is not required when replacing the sensor. The micro-controller sends the data to the Display Unit that can be read by the technician.

Interface Detection

The operating principle for oil-water interface level detection of the UTI detector involves measuring conductivity between an active electrode and a grounded electrode. When the liquid measured is conductive (e.g., water), the ullage sensor detects its existence. Afterwards, the conductivity electrodes and their related electronic circuits modify the coded signal generating an intermittent beep sound.

hermetic GTEX RTEX OTEX uti tape
GT3 MK3 UTI meter
MMC uti tape d-2401-2
TANKTECH uti tapp meter T2000-TFC-02 T2000-TFC-01
MARSEN uti tape UTL-200 UTL-300
SEA HOVER Sht2002 UTI Tape 
 

Application

Suitable for ULLAGE INTERFACE TEMPERATURE DETECTOR

Packaging & Shipping

Company Profile

FAQ

 

Q 1: I didn't find my needed model in this page.
Answer: Dear Friends, e-catalog will emailed to you asap when you contact with us. Also, we supply customization service. So,contact us !

Q 2: What's your Minimum Order Quantity?
Answer: 1PC

Q 3: When can I get the price and what's the validity?
Answer: usually within one day.Validity is 30 days

Q 4: What's your payment terms?
Answer: By T/T 30% in advance ; Balance 70% before shipment. 

Q 5: What's your delivery time?
Answer: It depends on whether we just have the stock for your type. Or, it takes about 10 - 30 days for normal orders.

Q 6: What's your package method ?
Answer: Usually, cartons
Any other questions please contact with us freely:)