Tank Gauging Tape Sensor MMC UTI Flexi DIP D 2401-2 Electronic Level Gauge for MMC Utimeter

• Customization: Available
• After-sales Service: Available
• Warranty: Half Year Without Huaman Damage
• Model NO.: MMC
• Length: 0-15m
• Color: Yellow
• Coating: ETFE Tefzel
• Cable Width: 12.5mm~13mm
• Transport Package: Carton
• Specification: 0-15m, 0-30m, 0-37m
• Trademark: no
• Origin: Shanghai, China
• HS Code: 8544491100
• Production Capacity: 5000/1 Month
• Package Size: 25.00cm * 25.00cm * 6.00cm
• Package Gross Weight: 1.500kg

Product Description

Product Description

Tank Gauging Tape Sensor MMC UTI Flexi Dip D 2401-2 Electronic level gauge for MMC UTImeter 

Cable width	12.5mm~13mm
Cable thickness	0.75mm~0.85mm
Ruler width	10mm±0.2mm
Coating	Coating material resistance to chemical and acid
Specification	30M
Color	yellow

 

 

special characteristics

Coating material resistance to chemical and acid.

High temperature resistance
How does Ullage Temperature Interface (UTI) work?
In the following paragraphs, we will introduce how the ullage, temperature and oil-water interface are detected onboard:
Temperature Detection
The sensing component of the UTI detector is a Platinum Resistance Temperature Detector (RTD). This element is situated in the temperature electrode that is filled with a heat transfer compound paste to hasten the latency. After digitizing the RTD element signal, the micro-controller in the sensor probe corrects and compensates for any errors. The RTD element's attributes are saved in the sensor memory and are exclusively for that sensor, so a new calibration is not required when replacing the sensor. The micro-controller sends the data to the Display Unit that can be read by the technician.
Interface Detection
The operating principle for oil-water interface level detection of the UTI detector involves measuring conductivity between an active electrode and a grounded electrode. When the liquid measured is conductive (e.g., water), the ullage sensor detects its existence. Afterwards, the conductivity electrodes and their related electronic circuits modify the coded signal generating an intermittent beep sound.

What is Ullage Temperature Interface (UTI)?
The UTI detector is a portable liquid level gauge that is commonly used in the shipping industry to measure the amount of hydrocarbons and chemicals in a ship's tank. This device includes a sensor probe, measurement tape, display unit, and winding drum. Its primary purpose is to determine the temperature and oil-water interface on tankers by attaching the sensor probe to the measurement tape, which can vary in length from 15m to 40m. Manufacturers offer a temperature range between -40°C and 110°C. All UTI meters have earth grounding capabilities for safety purposes.

Note: It is very important that the Ullage Temperature Interface system is grounded to the tank before the probe is introduced into the tank and remains grounded until after complete withdrawal from the tank.
How does Ullage Temperature Interface (UTI) work?
In the following paragraphs, we will introduce how the ullage, temperature and oil-water interface are detected onboard:
Ullage Detection
The ullage detector of the UTI integrates two elements (1) electronic circuits and (2) two piezoceramic plates. When the sensor head reaches the oil or petroleum, an ultrasonic sound is emitted. The receiver processes and sends this sound to the instrument unit that emits a continuous beep sound.

Temperature Detection
The sensing component of the UTI detector is a Platinum Resistance Temperature Detector (RTD). This element is situated in the temperature electrode that is filled with a heat transfer compound paste to hasten the latency. After digitizing the RTD element signal, the micro-controller in the sensor probe corrects and compensates for any errors. The RTD element's attributes are saved in the sensor memory and are exclusively for that sensor, so a new calibration is not required when replacing the sensor. The micro-controller sends the data to the Display Unit that can be read by the technician.

Interface Detection
The operating principle for oil-water interface level detection of the UTI detector involves measuring conductivity between an active electrode and a grounded electrode. When the liquid measured is conductive (e.g., water), the ullage sensor detects its existence. Afterwards, the conductivity electrodes and their related electronic circuits modify the coded signal generating an intermittent beep sound.

What types of Ullage Temperature Interface (UTI) exist?
UTI meters can be either open or closed types, with the latter having a gas-tight body to prevent hazardous gases from escaping the measurement tank.
hermetic GTEX RTEX OTEX uti tape
GT3 MK3 UTI meter
MMC uti tape d-2401-2
TANKTECH uti tapp meter T2000-TFC-02 T2000-TFC-01
MARSEN uti tape UTL-200 UTL-300

Application

Suitable for ULLAGE INTERFACE TEMPERATURE DETECTOR

Packaging & Shipping

 

Company Profile

FAQ

 

Q 1: I didn't find my needed model in this page.
Answer: Dear Friends, e-catalog will emailed to you asap when you contact with us. Also, we supply customization service. So,contact us !

Q 2: What's your Minimum Order Quantity?
Answer: 1PC

Q 3: When can I get the price and what's the validity?
Answer: usually within one day.Validity is 30 days 

Q 4: What's your payment terms?
Answer: By T/T 30% in advance ; Balance 70% before shipment.  

Q 5: What's your delivery time?
Answer: It depends on whether we just have the stock for your type. Or, it takes about 10 - 30 days for normal orders.

Q 6: What's your package method ?
Answer: Usually, cartons
Any other questions please contact with us freely:)