Tanktech T2000-Tfc-01 UTI Tape Replacement 30m Marine Tank UTI Gauging Tape with Calibration
|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | Half Year Without Huaman Damage |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Cable width
|
12.5mm~13mm
|
|
Cable thickness
|
0.75mm~0.85mm
|
|
Ruler width
|
10mm±0.2mm
|
|
Coating
|
Coating material resistance to chemical and acid
|
|
Specification
|
30M
|
|
Color
|
yellow
|
Marine & Offshore Tankers - Crude oil, chemicals, LNG carriers.
Storage Terminals - Bulk liquid tanks, refineries.
Industrial Use - Petrochemical plants, wastewater treatment.
The UTI detector is a portable liquid level gauge that is commonly used in the shipping industry to measure the amount of hydrocarbons and chemicals in a ship's tank. This device includes a sensor probe, measurement tape, display unit, and winding drum. Its primary purpose is to determine the temperature and oil-water interface on tankers by attaching the sensor probe to the measurement tape, which can vary in length from 15m to 40m. Manufacturers offer a temperature range between -40°C and 110°C. All UTI meters have earth grounding capabilities for safety purposes.
Note: It is very important that the Ullage Temperature Interface system is grounded to the tank before the probe is introduced into the tank and remains grounded until after complete withdrawal from the tank.
The sensing component of the UTI detector is a Platinum Resistance Temperature Detector (RTD). This element is situated in the temperature electrode that is filled with a heat transfer compound paste to hasten the latency. After digitizing the RTD element signal, the micro-controller in the sensor probe corrects and compensates for any errors. The RTD element's attributes are saved in the sensor memory and are exclusively for that sensor, so a new calibration is not required when replacing the sensor. The micro-controller sends the data to the Display Unit that can be read by the technician.
The operating principle for oil-water interface level detection of the UTI detector involves measuring conductivity between an active electrode and a grounded electrode. When the liquid measured is conductive (e.g., water), the ullage sensor detects its existence. Afterwards, the conductivity electrodes and their related electronic circuits modify the coded signal generating an intermittent beep sound.
ULLAGE TEMPERATURE INTERFACE DETECTOR is necessary for cargo tanker and it is designed for measuring the ullage level, the oil-water interface level, the temperature sampling the cargo.
hermetic GTEX RTEX OTEX uti tape
GT3 MK3 UTI meter
MMC uti tape d-2401-2
TANKTECH uti tapp meter T2000-TFC-02 T2000-TFC-01
MARSEN uti tape UTL-200 UTL-300
SEA Hover SHT2002 UTI TAPE
Who Is This For?
This replacement UTI tape is an essential spare part for:
Marine Engineers & Technicians maintaining vessel tank gauging systems.
Port Captains and Ship Operators managing fuel, ballast, and cargo tank levels.
Service Companies specializing in the repair and calibration of marine instruments.
Industrial Facilities using compatible Tanktech tank level equipment.
Common Use Cases:
Replacing a worn, damaged, or malfunctioning UTI tape in a T2000-TFC-01 system.
Performing scheduled maintenance and calibration of the tank level gauge.
Keeping as a critical spare part on board vessels or in workshop inventory to minimize downtime
Suitable for ULLAGE INTERFACE TEMPERATURE DETECTOR
){kind=link}